Advanced Wear and Bearing Materials

Esspee are delighted to have been appointed as distributors and machinists of Tenmat’s advanced wear and bearing resistant products.

Railko NF21 & NF22

Railko NF21 & NF22

RAILKO NF21 and NF22 grades are resin bonded composite structures with added friction modifiers to give a controlled friction. NF materials are vibration-absorbing bearing grades offering low friction and wear rates. Railko NF has been developed as a high performance...

read more
Railko RG1 & RG11

Railko RG1 & RG11

Railko RG1 and RG11 have been formulated by using a specialist woven fabric bonded with resin. They are both a hard wearing and dimensionally stable industrial bearing grades. Railko RG1 and RG11 grades have the advantages of high temperature capability, high...

read more
Railko RG2 & RG12

Railko RG2 & RG12

Railko RG2 and RG12 comprise of a resin impregnated woven fabric bonded with the inclusion of a friction modifier. The material is used as bushes, bearings, thrust washers and sliding pads. RG2/RG12 grades have the advantages of high temperature capability, high...

read more
Feroform F21

Feroform F21

Feroform F21 is a composite material made from woven fibre bonded resin with a friction modifier and is a universal dry application bearing grade. Feroform F21 has strength, durability, dimensional stability, low friction, and excellent wear characteristics. It is...

read more
Feroform F57

Feroform F57

F57 is a high temperature grade offering durability and wear resistance. It is a Kevlar reinforced high performance material designed for use in rotor vanes, compressors and vacuum pumps. The main areas of use of F57 are in milking pumps, blowers for cement plants,...

read more
Feroform F363

Feroform F363

F363 is a high temperature bearing grade manufactured with a cured phenolic resin matrix. It is reinforced with a woven glass/aramid fibre cloth and a friction modifier which is evenly dispersed throughout the matrix. Feroform F363 is a general purpose wearing and...

read more
Feroform T11

Feroform T11

T11 is a composite material made from woven synthetic fibres bonded with resin including a friction modifier. It is the material of choice used by the Royal National Lifeboat Institution (RNLI) on their lifeboat launch ramps. Feroform T11 provides high compressive...

read more
Feroform T12

Feroform T12

T12 is a composite material made from woven fibre bonded with resin, using molybdenum disulphide as a friction modifier. T12 is a low friction bearing grade for dry start-up prior to fluid lubrication. Feroform T12 has strength, durability, dimensional stability, low...

read more
Feroform T14

Feroform T14

T14 is a composite material made from woven fibre bonded with resin. It is the universal grade for fluid lubricated conditions where it hinders electrolytic corrosion in aqueous phases. Feroform T14 has been developed as a superior bearing material used in many marine...

read more
Feroform T814

Feroform T814

T814 is a composite material made from woven fibre bonded with resin which uses PTFE as a friction modifier. T814 grade has strength, durability, dimensional stability, low friction, and excellent wear characteristics. It has the ability to run both dry and wet with...

read more