Esspee’s exclusive range of ThermTek® Fibre materials deliver thermal efficiency at high temperatures and combine the advantages of low heat storage and resistance to thermal shock.
Ceramic Fibre Blanket is a soft, durable and lightweight insulating material ideal for use at elevated temperatures of up to 1430°C in demanding thermal environments. Ceramic Fibre Blanket is produced by laying loose fibres into a continuous mat roll which is then...
Bio-Soluble Blanket is developed from a unique technology which creates a fibre with excellent mechanical and thermal characteristics that are comparable to ceramic fibres. Manufactured from a blend of Magnesium and Silica raw materials, the fibre is then laid down to...
Ceramic Fibre Paper is produced from Alumina Silicate fibres and selected bonding agents which burn-off on ignition. Ceramic Fibre Papers exhibit good resistance to tearing, are flexible and resistant to thermal shock. This lightweight insulating paper is ideal for...
ThermTek® Bio-Soluble paper is made from high temperature alkaline earth silicate wool (AES) which possesses superior thermal insulating properties and low bio persistence. ThermTek® Bio-soluble paper features high bending strength, no fibre stratification, low...
Ceramic Fibre Board is a rigid insulating material available in low, medium and high densities and manufactured using refined ceramic fibres, fillers and binders. CF Boards are ideal for use at temperatures of up to 1600°C and exhibit excellent strength...
ThermTek® Bio-soluble board is also manufactured from high temperature alkaline earth silicate wool (AES). AES ensures rigidity, low thermal shrinkage and high binding strength. In Bio-soluble form, ThermTek® BioBoard is proven for bio persistence and is therefore...
Ceramic fibre modules are produced using a ceramic fibre blanket to create a folded or edge stacked profile. They are supplied pre-fabricated complete with anchors and are specifically designed for industrial furnaces, kilns and heaters. During the manufacturing...
Our vacuum forming process enables us to make complex bespoke shapes by drawing water under vacuum through a forming tool after adding ThermTek® chopped bulk fibre. ThermTek® VF Shapes are available in a range of densities and able to withstand temperatures up to...
Bulk fibre is available in a variety of ranges each exhibiting different properties. The ranges available vary by composition, compressed density, fibre length, fibre diameter and lubricity. The fibres offer excellent resistance to chemical attack, thermal shock and...
ThermTek® mastics are a multi purpose form of CF or Bio-Soluble fibres blended with high temperature binders that allow adhesion to most ceramic and metallic surfaces. ThermTek® mastics are commonly used to prevent heat loss caused by the deterioration of an existing...
ThermTek® moist felt combines ceramic fibre blanket with an inorganic bonding agent resulting in a pliable layer that cures to a hard, rigid mass, ideal for insulating complex shapes, profiles and sections. ThermTek® moist felts can be easily moulded and shaped by...